boat water pump gasket sealer
A noncorrosive, sensor-safe rtv silicone gasket material formulated specifically for water pumps and thermostat housings. highest water-glycol resistance available in an rtv silicone.. Tip: if you flush the cooling system with a water pump attached, use the old water pump and not the new one, to prevent impurities from contaminating the new pump. 3. don’t apply sealant to an o-ring or a dry seal. when changing a water pump, replace all old gaskets and seals with new ones.. Re: water pump gasket sealer oem sealant is very similar to a non-hardening aviation permatex, often found in a small plastic bottle with a built-in brush/lid. although it is a great sealant when used, it still has a tendency to tear gaskets upon disassembly. it works great on lower unit mounting bolts as an anti-seize..
boat water pump gasket sealer This is a well designed pump. the oil seal is isolated by a weep slot or weep hole from the water side of the pump and seal. even if the water side seal were to leak, the water will just drain out the weep hole. if the oil side were to leak it too would simply drain out the weep hole. neither side of this pump can pressurize or leak into one.
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.