Boat Varnish Temperature

boat varnish temperature

Wait for the weather to be right. sand thoroughly. do all the prep work. when it comes to a varnish project, haste will inevitably make waste. choose the right weather: varnish indoors if possible. you can varnish anywhere between 50 and 80 degrees, but ideal conditions are 55 to 65 degrees with 45 to 55 percent relative humidity.. So when can you paint? surface temperature should be 6 degrees above the dew point. generally paint when temperatures are rising to avoid getting caught by dew point. do not apply paint above 85% rh. preferably apply paint, especially two part polyurethanes when relative humidity levels are at or below 70%.. Our jd homemade varnish recipe is an old down east deck coating formula traditionally used on wooden decks for schooners, fishing boats, and porch decks. you will need 1 qt of turpentine, 1 qt boiled linseed oil, 1/2 pt pine tar, and 1/2 pt japan drier..

Best boat bottom paint

Envy 2-part clear varnish - totalboat

boat varnish temperature Roll the paint on in small sections (for example, approximately 2 feet wide) that are appropriate for the size of the boat and the temperature (hot or cold) conditions. this gives the person rolling adequate time to distribute the paint evenly and keep the wet edge, and the person tipping enough time to tip without the brush dragging from. Jim seidel, who retired as marketing manager of interlux, says, "you need to be careful when applying tung-oil varnish on horizontal surfaces as you can lay it on too heavily and it feels dry, but depending on the thickness of the coating and temperature you're working in, it may trap solvent and can lead to alligatoring.".